Use these brackets to build your own Shop Table, Garage Workbench, CNC Table, Backyard Deck, Gazebo or Pergola.
Made with Heavy Duty 12-gauge steel, almost 1/8” thick, Made in the USA, with USA Made Steel!
Mounting holes sized to be installed using 1/2" lag screws or 1/2" bolts. You can also weld the brackets if you want to build your table out of metal supports. Mounting/attachment hardware not included.
We can also make custom brackets for your project, just shoot us a message with a diagram and quantity of what you are needing, and we will give you a quote.
Brackets we offer:
Corner Brackets – Designed to fit over standard 6 x 6 posts. (Actual wood dimensions of a 6x6 post are 5.5” x 5.5”). They are then bent at a 90-degree angle to fit over the 6x6 posts. The top legs contain three (3) holes each for attaching to the cross members and four holes on the bottom leg (2 on each side) for mounting to the leg. (Note: The leg holes are offset):
Flat T brackets –A T shape Flat Bracket to add strength to a joint:
Bent L’s – A bracket bent at 90 degrees to use where you want to add strength to an inside corner:
Flat L’s - Flat L shaped bracket, used to add strength to an outside joint.
Double Inside Corner – Like the Bent L but used where there is a need to add strength to an inside corner.
Please note that you need to consult an Engineer if you want to know load calculations for your beams and ties. As a general rule 12 gauge is close to 1/8" steel and will add more rigidity and is suitable for most projects. Again we offer no structural guarantee for load bearing purposes, Please consult a Professional Engineer to perform calculations if required.
Materials: Steel, Raw Metal, Bare Metal, Powder Coated, Paint
Made with Heavy Duty 12-gauge steel, almost 1/8” thick, Made in the USA, with USA Made Steel!
Mounting holes sized to be installed using 1/2" lag screws or 1/2" bolts. You can also weld the brackets if you want to build your table out of metal supports. Mounting/attachment hardware not included.
We can also make custom brackets for your project, just shoot us a message with a diagram and quantity of what you are needing, and we will give you a quote.
Brackets we offer:
Corner Brackets – Designed to fit over standard 6 x 6 posts. (Actual wood dimensions of a 6x6 post are 5.5” x 5.5”). They are then bent at a 90-degree angle to fit over the 6x6 posts. The top legs contain three (3) holes each for attaching to the cross members and four holes on the bottom leg (2 on each side) for mounting to the leg. (Note: The leg holes are offset):
Flat T brackets –A T shape Flat Bracket to add strength to a joint:
Bent L’s – A bracket bent at 90 degrees to use where you want to add strength to an inside corner:
Flat L’s - Flat L shaped bracket, used to add strength to an outside joint.
Double Inside Corner – Like the Bent L but used where there is a need to add strength to an inside corner.
Please note that you need to consult an Engineer if you want to know load calculations for your beams and ties. As a general rule 12 gauge is close to 1/8" steel and will add more rigidity and is suitable for most projects. Again we offer no structural guarantee for load bearing purposes, Please consult a Professional Engineer to perform calculations if required.
Materials: Steel, Raw Metal, Bare Metal, Powder Coated, Paint